Guide for Comforth MicroDerm

Before treatment

Cleanse the skin to ensure it is pure, dry and free of make-up. You can choose any suction head, however, for the first treatment, the diamond head is recommended.

Switch on the machine on the lowest suction power and test it on the back of the hand. This is recommended to practice angling and movement before using it on the face. Wait 5 minutes to see your skin's reaction before proceeding.

The face can advantageously be steamed before treatment to open and relax the pores. This is done either using a facial steamer or by letting the steam from boiling water hit the face for 5-10 minutes. However, this is not a requirement.

Under processing

The machine has 4 suction strengths. For the first treatment, it is important to only use the lowest and thus most gentle suction power. With subsequent treatments, you can gradually increase the suction power. Exception: If you want to remove blackheads around the nose with the small suction head, suction strength 3-4 can be used.

The treatment is carried out by gently moving the machine over the natural lines of the face in quick, smooth strokes. Avoid treating an area more than 2-3 times and do not keep the machine in the same place for several seconds.

Stop treatment if you experience pain. Pain can be caused by the suction power being too high, the machine being kept in the same place for too long, or an area being over-treated.

After treatment

Remove the suction head and clean with water and possibly a cotton swab. It is also recommended to disinfect the suction head.

Rinse the face with cold water to close the pores and soothe the skin. It is important that the skin gets plenty of moisture. Therefore finish with your usual face cream or mask.

Learn after each treatment and adjust to suit your skin in the future.